Officine Rami
How to take measurements.
Actual Measurement | Opening Measurement
The first step for a quick and trouble-free installation is the correct measurement. Measuring the width and height allows to check for any out-of-square issues and choosing the best model.
To proceed with the measurement of width (W) and height (H), it is advisable to measure both at the centre and on the sides, always indicating the lowest measurement. When placing an order, it is essential to specify whether the measurement indicated is an Actual Measurement or Opening Measurement, as each type of measurement corresponds to a specific processing method:
Actual Measurement, the mosquito net is supplied with the same measurements specified when placing the order.
Opening Measurement, the mosquito net is supplied with the base and height reduced by 2 mm compared to the actual measurements of the opening.
Configurations
![](https://d4kuf7e5g785p.cloudfront.net/wp-content/uploads/2023/07/1.png)
![](https://d4kuf7e5g785p.cloudfront.net/wp-content/uploads/2023/07/2.png)
NOTE: For Recessed Mosquito Nets, it is always necessary
to specify the Actual Measurement; the mosquito net will be supplied
with the same measurements specified when placing the order (maximum space
required).
![](https://d4kuf7e5g785p.cloudfront.net/wp-content/uploads/2023/07/3.png)
![](https://d4kuf7e5g785p.cloudfront.net/wp-content/uploads/2023/07/4.png)
NOTE: No technical warranty will be provided for products not included in the recommended measurements.
Actual Measurement:
Width = (W + X + Y) * Height = (H + Z)